PALM OIL MILLS-Processing & milling – PALM OIL ENGINEERING BULLETIN https://poeb.mpob.gov.my Malaysian Palm Oil Board (MPOB) Sun, 29 Mar 2020 17:14:12 +0000 en-US hourly 1 https://wordpress.org/?v=7.0 Mongana basic: part 8 https://poeb.mpob.gov.my/mongana-basic-part-8/ Sun, 29 Mar 2020 17:14:12 +0000 https://poeb.mpob.gov.my/index.php/2020/03/29/mongana-basic-part-8/ After centrifugal extraction of the digested mash, the fibre contains 13% to 25% oil on dry matter and 45% to 55% of moisture. The percentage of residual oil in fibre is still too high amounting to 8% to 18% of the total oil. If the fibre is subjected to a pressure of 50 bar the residual oil can be further brought down to 8% – 9%. The extracted crude oil is very thick laden with solids. It contains approximately 20% oil. With centrifugal separation, only 80% to 85% of the oil can be separated due to the high solid content. The residual oil remained attached to cellular debris.

]]> 1174 Welding technology for good milling practice : module 1 : safety and health in welding environment https://poeb.mpob.gov.my/welding-technology-for-good-milling-practice-module-1-safety-and-health-in-welding-environment/ Sun, 29 Mar 2020 17:14:12 +0000 https://poeb.mpob.gov.my/index.php/2020/03/29/welding-technology-for-good-milling-practice-module-1-safety-and-health-in-welding-environment/ It is invariably a fact that one opens their eyes only when an accident or mishap takes place. Often people hurt themselves and even lose their lives in accidents. Then only will people start investigating why the accident took place.

]]> 1175 Dialogue session with the palm oil industry and stakeholders / Engineering and Processing Division, MPOB https://poeb.mpob.gov.my/dialogue-session-with-the-palm-oil-industry-and-stakeholders-engineering-and-processing-division-mpob/ Sun, 29 Mar 2020 17:14:12 +0000 https://poeb.mpob.gov.my/index.php/2020/03/29/dialogue-session-with-the-palm-oil-industry-and-stakeholders-engineering-and-processing-division-mpob/ MPOB organized a dialogue session with the palm oil industry and the stakeholders in order to get their feedback on the potential of utilizing palm oil mill effluent-based (POME) biogas for either power generation or other clean development mechanism (CDM) related uses. Various ways of using biogas were presented to the participants of the session and their valuable feedback were conveyed to the ministry. The response was overwhelming and participants were very active during the dialogue session.

]]> 1177